SET UP GUIDEUpdated 3 years ago
HOW DO I SET UP MY MACHINE?
- lnsert the power socket into a power outlet.
- Fill water tank with cold water.
- Place the drip tray in the appropriate height for your cup size. It is possible to detach the drip tray and lay it flat at the bottom surface underneath the nozzle for larger cups or macchiato glasses.
- Switch the machine ON by flipping the toggle switch up. Both the espresso and lungo buttons will start blinking to indicate that the machine is warming up.
- The machine is ready to use when the lights stops blinking and stays on.
- Run 4-6 cups of water before your first brew.
HOW DO I LET WATER INTO MY MACHINE?
When your new machine arrives, it is completely out of water, and may need to deair it to let water in. You will notice this when you have filled the water tank, but no water comes out when it’s supposed to start brewing. The machine will also make the same noise it does when performing a normal brewing procedure.
To deair your machine, follow the steps below:
- Turn the machine ON.
- Fill up the water tank.
- Have the capsule inlet lever in its upright position. Push it slightly further back towards the back of the machine until you hear a sound.
- Run a cup of water through the machine before brewing a cup of coffee by pressing either the espresso or the lungo button. Your machine is deaired when water comes out of the nozzle.